Control Valves

Control Valves

WATCO, the esteemed channel partner for SINGER VALVES in the state of Odisha. At WATCO, our unwavering dedication to excellence and our commitment to providing cutting-edge fluid control solutions define our role as an authorized distributor. Through our strategic partnership with SINGER VALVES, we proudly deliver advanced valve technology to industries throughout the region.

Experience the epitome of precision and reliability with SINGER Control Valves, setting the industry benchmark for excellence in fluid control technology. Recognized globally for their innovative solutions, SINGER Control Valves assume a crucial role in optimizing processes across diverse industries.

  • mixed vegetable salad in a mason jar.

    ELECTRONIC CONTROL VALVES

    106 / 206-2SC-PCO Dual Solenoid Control for Positioning and SCADA Controls

    The Singer models 106-2SC-PCO and 206-2SC-PCO dual solenoid electronic valves are based on the Singer model 106-PG or 206-PG main valve.

    The flow into and out of the upper operating chamber is controlled by the two pilot solenoids. The electronic control determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which solenoid is operated and the duration of the energized period.

    The electronic control determines the valve function. Virtually any hydraulic function can be achieved using the “open-close” output from the SCADA controller to the valve.

    • Precise control from remote locations
    • Process controller compatible
    • Minimal power needed for stand-by operation
    • Complete service in-line
    • Manual controls for emergencies
  • a Reuben sandwich on wax paper.

    LEVEL CONTROL VALVES

    106 / 206-A-Type 1 Two-Way Flow Altitude Control Valve

    The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level.

    The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow reverse flow through the valve when the supply pressure drops a fixed amount below the reservoir head

    When a higher supply pressure is restored, the Type 1 valve will then allow normal forward flow to refill the tank to the maximum level.

    • No overflows
    • Superior repeatability
    • Minimal power needed for stand-by operation
    • Positive shut-off
    • Easily serviceable at ground level
  • A side view of a plate of figs and berries.

    LEVEL CONTROL FLOAT VALVES

    106 / 206-F-Type 5 Non-Modulating Float Valve

    The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily accessible.

    The valve functions as a two position valve, either open or closed. The valve remains closed when the reservoir level drops, until the float reaches the per-determined adjustable minimum reservoir level. The F-Type 5 valve then opens to refill the reservoir and closes tightly when high water level is achieved.

    • No overflow, drip-tight close
    • Adjustable draw down
    • Easily adjustable level settings
    • Low supply pressure options
  • A side view of a plate of figs and berries.

    LEVEL CONTROL FLOAT VALVES

    106 / 206-F-Type 4 Modulating Float Valve

    The Singer model 106-F-Type 4 and 206-F-Type 4 modulating float valves are based on the 106-PG or 206-PG main valve. They are ideal for balancing the inflow and outflow demand into the reservoir and maintaining level at the designated maximum.

    The valve closes drip-tight at the maximum level and modulates to maintain the tank level. The float pilot is remotely installed at the high level in the reservoir tank. Pilot connections to the main valve are connected in the field. As the reservoir level drops the main valve is opened proportionally to increase the filling rate. Movement of the main stem alters the size of the closing restriction, interrupting the tendency of the valve to hunt..

    • Maintains relatively constant level
    • Automatic compensation for level draw-down
    • Standard integral damping reduces hunting
    • Drip-tight at high level shut-off
    • Low supply pressure options